YMz1K B2ca ss -D- 0.6/1kV gy# 1x35 mm²
Article number
326020114B
Description
Halogen-free installation power cable
- Number of conductors: 1.
- Conductor diameters: 35mm².
- Outer cable diameters: 12,3mm.
- Conductor: Bare copper, =< 6mm² is solid, => 10mm² is conjoined. (according to IEC 60228).
- Insulation: XLPE.
- Outer sheath: Halogen-free compound.
- Rated temperature while using: -40°C to 70°C (B2ca).
- Minimum bending radius during installation: 10 x ø.
- Minimum bending radius installed: 8 x ø.
- Application: can be used in fixed construction and in above-ground low voltage installations and may be used in all areas.
- This cable is often used in installations where very high requirements are set for fire safety, such as in hospitals, hotels, schools, retirement homes, etc.
- Fire behaviour: according to EN 13501-6 (B2ca-s1,d1,a1).
- Number of conductors: 1.
- Conductor diameters: 35mm².
- Outer cable diameters: 12,3mm.
- Conductor: Bare copper, =< 6mm² is solid, => 10mm² is conjoined. (according to IEC 60228).
- Insulation: XLPE.
- Outer sheath: Halogen-free compound.
- Rated temperature while using: -40°C to 70°C (B2ca).
- Minimum bending radius during installation: 10 x ø.
- Minimum bending radius installed: 8 x ø.
- Application: can be used in fixed construction and in above-ground low voltage installations and may be used in all areas.
- This cable is often used in installations where very high requirements are set for fire safety, such as in hospitals, hotels, schools, retirement homes, etc.
- Fire behaviour: according to EN 13501-6 (B2ca-s1,d1,a1).
Files
Datasheets
YMz1K B2ca TOP |